Non-contact Automatic Thermometer AX-K1
Non-contact Automatic Thermometer AX-K1
1. Product structure drawing
2.Specification
1.Accuracy: ±0.2 ℃(34~45 ℃ ， place it in the operating environment for 30minutes before use)
2. Abnormal automatic alarm: flashing +”Di ” sound
3.Automatic measurement: measuring distance 5cm~8cm
4. Screen: Digital display
5.Charging method: USB Type C charging or battery(4*AAA, external power supply and internal power supply can be switched).
6. Install method: nail hook, bracket fixing
7.Environment temperature:10C~40 C(Recommended 15 ℃~35℃)
8. Infrared measuring range:0～50 ℃
9. Response time: 0.5s
10. Input: DC 5V
11.Weight:100g
12.Dimensions:100*65*25mm
13. Standby: about one week
3.Easy to use
1 installation steps
Important:(34—45℃，place it in the operating environment for 30 minutes before use)
Step 1: put 4 dry batteries into the battery tank (note the positive and negative directions) or connect the USB power cable;
Step 2: turn on the switch and hang it at the entrance;
Step 3: detect if there is anyone, and the detection range is 0.15 meters;
Step 4: aim the temperature probe with your hand or face (within 8CM)
Step5: delay 1 second and take your temperature;
Step 6: temperature display;
Normal temperature: Flashing green lights and alarm “Di”（34℃-37.3℃）
Abnormal temperature: Flashing red lights and alarm “DiDi”10 times（37.4℃-41.9℃）
Default:
Lo：Ultra-low temperature alarm DiDi 2 times and flashing yellow lights（Below 34℃）
Hi：Ultra-high temperature alarm DiDi 2 times and flashing yellow lights（Above 42℃）
Temperature unit: Short press power switch to change ℃ or ℉. C:Celsius F: Fahrenheit
4. Warnings
1.It is the user’s responsibility to ensure the electromagnetic compatibility environment of the device so that the device can work normally.
2.It is recommended to evaluate the electromagnetic environment before using the device.
3.When changing the operating environment, the device must be left to stand for more than 30 minutes.
4.Please measure the forehead to the thermometer.
5.Please avoid direct sunlight when using outdoors.
6.Keep away from air conditioners, fans, etc.
7.Please use qualified, safety-certified batteries, unqualified batteries or non-rechargeable batteries used may cause fire or explosion.
5. Packing list
